Bending machine usage
According to the ordinary hydraulic bending machining Q235 sheet to do a simple introduction:
1, the first is connected to the power supply, open the key switch on the control panel, and then according to the oil pump starts, so you will hear the rotation of the pump. (the machine not action)
2, the stroke control, bending machine use must pay attention to adjust stroke, before bending test. Bending machine die down to the bottom when must make the pledge that we shall have a thickness of the gap. Otherwise, can cause damage to the mold and machine. Stroke is the regulation of electric adjustment and manual stomach.
Slit choice 3, bending, generally choose thickness of 8 times the width of the slot. Such as bending sheet of 4 mm, need to choose around 32 slot.
4 behind, adjust usually have electric adjustment and manual fine tuning, method with the plate shears.
5, stepped on the foot switch to bending, bending machine and shearing machine is different, can loosen, loosen the feet bending